Regent User Manual
| 15
Installing the Color Touch-Screen
The color touch-screen comes pre-installed on its
mounting bracket.
NOTE:
Confirm that the power is turned off
before installing the color touch-screen.
1. Remove the two bolts from the bag in which they
are packed.
2. There are three holes on top of the machine
head. Only the two holes that are in line with
each other are used. Ignore the third hole located
to the side of these two holes.
3. Align the holes in the color touch-screen bracket
with the two holes on top of the machine, with
the touch-screen facing the needle end of the
machine.
4. Use a 5mm Allen wrench to insert the two long
bolts through the holes of the bracket and into
the machine. Tighten in place.
5. Plug the remaining cable end into the display
connector located on the side of the machine.
6. Remove the protective plastic from the touch-
screen before using.
