Baby Lock Elissimo & Elissimo GOLD BLSO-BF2, Руководство по установке

Страница: 5 / 36

3
EN
GL
IS
H
Installation Overview
First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the CERTIFICATION key within the Settings screen,
page 5, to activate the upgrade application for KIT III on
the sewing machine.
In the procedures section, indicates operations
performed with the sewing machine and
indicates operations performed with the computer.
[Step 1] Make a note of the internal
machine identification number (No.).
[Step 2] Insert the CD-ROM into the
computer’s CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
for KIT III on the sewing machine.
[Step 5] Remove the USB media, and
turn the machine off and then on again.
[Step 6] After the upgrade has been
successfully installed, certify the “KIT
III
”
in the Settings screen of the sewing
machine.
Computer Requirements
Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
* “IBM” is a registered trademark of IBM Corporation in the United
States and other countries.
* “Windows XP”, “Windows Vista”, and “Windows 7”, are registered
trademarks of Microsoft Corporation in the United States and other
countries.
* Each company whose software title is mentioned in this guide has a
Software License Agreement specific to its proprietary programs.
All other brands and product names mentioned in this guide are
registered trademarks of their respective companies. However, the
explanations for markings such as
®
and ™ are not exhibited
clearly within the text.
Installation Procedure
The following procedure describes how to upgrade
your sewing machine to KIT
III .
a
Make a note of the 10-digit number (internal
machine identification number) displayed
beside “No.” on page 5 of the Settings screen.
Computer IBM-PC or compatible computer
Operating System Windows XP, Windows Vista
and Windows 7
CD-ROM drive Required for installation
Others Internet connection available
and one available USB port
(required to upgrade the sewing
machine) when using computer
Note
• If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to KIT
III .
• Access to the Internet is required in order to obtain a
Certification Key.
Memo
• Make sure the internal machine identification
number (No.) is recorded accurately as these
numbers need to be entered within the Certification
Key Issuing Wizard in order to obtain the
Certification Key.