Baby Lock Destiny BLDY, Инструкция и справочник

Страница: 185 / 225

CARE AND MAINTENANCE
378
Cleaning the Bobbin Case
Thread wax and dust easily collect around the
notch in the tension spring on the bobbin case,
resulting in an incorrect thread tension. Therefore,
the bobbin case should be cleaned as necessary
should tension problems arise.
When cleaning the bobbin case, use card stock or
another type of paper of similar thickness and
sturdiness in order to prevent pieces of paper
tearing off and getting lodged in the bobbin case.
a
Follow steps
a
to
f
in “Cleaning the
Race” to remove the bobbin case.
b
Using a piece of paper of adequate
thickness and sturdiness, slide the paper
between the tension plate base and the
tension spring and also slide the paper
behind the notch of the spring to remove
any dirt or dust.
a
Tension plate base
b Notch
c
Paper (e.g. business card type)
d
Tension spring
c
Use the cleaning brush to remove any lint
and dust from inside the bobbin case.
d
Replace the bobbin case and needle plate
cover.
Cleaning the Cutter in the Bobbin
Case Area
The cutter below the needle plate should be
cleaned. If dust or lint accumulate on the cutter, it
will be difficult to cut the thread when the “Thread
Cutter” button is pressed or the automatic thread
cutting function is used. Clean the cutter when the
thread is not easily cut.
a
Follow steps
a
through
e
in “Cleaning the
Race” to remove the needle plate cover.
b
Use the screwdriver included with the
machine to unscrew and remove the needle
plate.
c
Use the cleaning brush or a vacuum cleaner
to remove any lint and dust from the cutter
in the bobbin case area.
a Cutter
d
Use the screwdriver included with the
machine to screw and attach the needle
plate.
Memo
• Do not bend the tension spring. In addition,
do not use anything other than
recommended paper to clean the bobbin
case.
CAUTION
• Do not touch the cutter, otherwise injuries
may result.