50 | www.BabyLock.com
The next time you use one of the threads that was set-up as a low-bobbin threshold
is used, touch the bobbin name box and select the specified thread name. Insert a full
bobbin with that thread into the machine and press the
Reset Bobbin
button on the
Main screen.
To delete a low-bobbin configuration
• Touch the
bobbin name
box and select the specified thread name. Then touch the
Delete Bobbin
button.
To edit a low-bobbin configuration
• Touch the
bobbin name
box and select the specified thread name. Select the
Edit
Bobbin
button. Make any changes using the pop-up keyboard.
Pinpoint Needle Laser
The Regalia ST comes equipped with a needle laser, which
shows precisely where the needle will enter the quilt. Turn the
laser on or off with the Laser settings.
To turn the laser on or off
• Touch the
Settings
icon in the Toolbar. Then touch the
Laser
button. Touch the
toggle button
to turn the laser on or off.
Control the needle laser. The
laser is currently on.
Touch the
toggle
button
to turn the
laser on or off.
