3 - 6
Needle bar, presser mechanism / upper shaft mechanism
Main unit
7
Connecting the needle-presser module and upper shaft
1. Face the unit shaft D cut
1
and the upper shaft D cut
2
forward.
2. Screw the 2 screws
1
into the fixed joint
3
.
*Key point
• Adjust the gap on the left side of the fixed joint
3
to 0.5 mm.
• Align the screw holes for
the screw
1
with the D cuts
1
and
2
.
3. Rotate the upper shaft half a turn, and tighten the 2 screws
2
in the 2
screw holes on the fixed joint
3
.
*Key point
• Tighten the screws
2
in the following order:
2
-2 and then
2
-1.
• Be sure to tighten the 2 screws
2
after fully tightening the 2
screws
1
on the fixed joint.
4. Tap the lower shaft bushing
5
on lightly so that the upper shaft
4
turns
easily.
Needle bar and presser unit assy. and fixed joint gap
0.5 mm
1
Torque
1.37 – 1.79 N·m
2
Torque
0.78 – 1.18 N·m
1
0.5 mm gap
4
3
1
2
4
5
2
- 1
2
- 2
3
Set Screw, Socket (FT)
M5X5
Set Screw, Socket (CP)
M4X4
8
Tension pulley assembly attachment
1. Hand start the screw the screw
1
in the tension pulley
1
and attach to the
arm bed (fully tighten after 4 - 6 "Timing belt tension adjustment.").
1
Torque
1.18 – 1.57 N·m
1
1
Screw, Pan (S/P washer)
M
4X10DA
Содержание BLMY
