Baby Lock BLKF, Руководство по сборке

Страница: 8 / 28

8 Baby Lock Kinetic Frame Assembly Instructions
Parts needed
(1) table assembly
(2) upper end leg A
(2) upper end leg B
(2) lower end leg
(4) leveling glide
(8) M8x16mm socketed button head
cap screw QF09318-07
(8) M8x25mm socketed button head cap screw
Tools Required
5mm Allen wrench (provided)
3-1: With the table on the protective surface,
still facing down, position the upper end legs
A & B so the height adjustment latches face
each other across the short end of the table.
(See Fig. 3-1 and Detail 3.1.)
3-2: Attach each upper end leg to the table
with two (2) M8x16mm screws through the
upper corner leg brackets at front or rear and
with two (2) M8x24mm at the end. Lightly
tighten for now with the 5mm Allen wrench.
Step 3
End Leg Assembly
3-3: Slide one (1) lower corner leg onto the
two (2) upper corner legs on each end of the
frame as shown in Fig. 3-2 on the previous
page and Fig. 3-3. Choose the preferred height
of the frame based on the table in Fig. 3-4.
Fig. 3-1
Fig. 3-2
Height-Adjustment
Latches
Upper End
Leg B
Upper
End Leg B
Upper
End Leg A
Upper End
Leg A
M8x16mm QF09318-07
front and rear
M8x25mm
QF09318-06
at end
Detail 3-1