6
6
7
1
Pinch the clamp behind the seat, and slide it down to desired
recline. Pull seat down on both sides to match recline position
of clamp. Reverse steps to return to the upright position.
1
Locate the Velcro strap on the back of the seat below
the handle bar grip. Slide strap between the seat fabric
and stroller frame.
2
Wrap the Velcro strap snuggly around the stroller
frame tubing and fasten to the Velcro tab on the
back of the seat to push seat forward. Repeat steps
on the opposite side of the seat. Wrap the
Velcro strap around the center frame tubing
to place the seat in its most upright position.
UprIGht straps
Weather Cover:
If desired, pull weather
cover down and over the seat back mesh.
Secure firmly over both sides of seat.
When not in use, roll weather cover up
and fasten with elastic loop and barrel
provided under top of the canopy fabric.
seat reClINe
To recline:
1
Unclip top of shoulder strap
from the seat and re-clip on
the pair of seat loops closest
to child’s shoulder height.
1
Pull shoulder pads down close to main harness buckle.
2
Hold the plastic guide and pull the strap end to tighten or pull
the upper harness strap to loosen.
3
Fasten both shoulder strap buckles
into the crotch strap buckle. The
buckles should always be clicked
into place before use.
saFety harNess
To adjust harness height:
To adjust harness length:
Warning:
Always use the
crotch strap in
combination with
the shoulder straps
and waist belt.
To buckle:
To unbuckle:
4
Press both sides of the
shoulder buckles to release
them from the crotch buckle.
Warning:
Avoid serious
injury from falling
or sliding out.
Always properly
adjust and fasten
safety harness.
