3
WARNING! - CONTINUED
• RAISE SIDE WITH ZIPPER (COMPLETELY CLOSED) TO USE BASSINET MODE.
• PUSH ADULT MATTRESS AGAINST BEDSIDE SLEEPER AFTER SECURING TO
BED WITH SAFETY STRAPS.
• NEVER LEAVE INFANT IN BASSINET MODE WITH SIDES DOWN.
• THE ANCHOR PLATE AND STRAPS ASSEMBLY MUST ALWAYS BE USED IN
BEDSIDE SLEEPER MODE. PRODUCT IN BEDSIDE SLEEPER MODE MUST BE
TIGHTLY ATTACHED TO ADULT BED MATTRESS TO ENSURE SAFETY.
• IT IS RECOMMENDED TO MAKE THE STRAP SHORTER THAN THE WIDTH
OF THE MATTRESS TO ENSURE BEDSIDE SLEEPER IS PRESSED SECURELY
AGAINST THE PARENTAL BED, WITHOUT ANY GAPS.
• A BEDSIDE SLEEPER IS DESIGNED TO PROVIDE A SLEEPING AREA FOR AN
INFANT UNTIL HE OR SHE BEGINS TO PUSH UP ON HANDS AND KNEES, OR
APPROXIMATELY 5 MONTHS OF AGE, MAXIMUM WEIGHT OF 9KGS. MOVE YOUR
CHILD TO ANOTHER SLEEPING PRODUCT WHEN YOUR CHILD REACHES
THIS STAGE.
IMPORTANT!
INSERT THE MATTRESS SUPPORT STRAPS INTO HIDDEN POCKET UNDERNEATH
THE BEDSIDE SLEEPER WHEN USING IN FREESTANDING BASSINET MODE TO
AVOID ANY LOOSE HANGING STRAPS.
Assembly/Operating Instructions
1
Lay the SLEEPER FRAME face down
on a flat surface and open both of the
FRAME LEGS outward.
Plug FEET into each LEG with the
BRAKE LEVER facing inward.
Assembling the BASSINET:
2
BD06070
