7
IN THE BEDSIDE SLEEPER MODE THE TWO LEGS OF THE BEDSIDE SLEEPER
SHOULD ALWAYS BE ADJUSTED TO THE SAME HEIGHT.
4. In order to attach the BEDSIDE SLEEPER to the parent’s bed in BEDSIDE SLEEPER
mode, use the attached pair of ANCHORS provided.
5. Slide the ANCHORS between the top MATTRESS and the base across the opposite
side of the bed using a back and forth ‘sawing’ motion and at the same time pulling
downward until the STRAPS and ANCHORS are in the desired position.
Bedside Sleeping Mode - Continued
WARNING:
ENSURE THE ANCHORS ARE STRAIGHT.
WARNING:
Unzip the sides of the BEDSIDE
SLEEPER until they are
completely unzipped.
Slide the TOP BAR LOCK LEVER away from the TOP BAR and lift top bar out of
groove on both sides and fold down.
1
2
3. Move the BEDSIDE SLEEPER close to the parent’s bed and check the height of the
BEDSIDE SLEEPER compared with the MATTRESS on the bed. The SIDE SUPPORT
of the BEDSIDE SLEEPER should always be placed close to the parent’s MATTRESS
and the MATTRESS should always be aligned with the height of the SIDE SUPPORT
for restraint of the BEDSIDE SLEEPER.
