Dokumentation
INTERCOM
MODULE
Mounting INTERCOMMODULE IP
INTERCOM
MODULE
BAB TECHNOLOGIE GmbH 9
LED STATUS
2.1
The
INTERCOM
MODULE has two DUO LEDs ("Power / Boot" and "Status"). Each DUO LED has one
green and one red LED. The upper LED is for power / boot, the lower LED is the status LED.
POWER / BOOT LED
LED display
Status
OFF
The device is not ready for operation. No operating
voltage is supplied
GREEN
The device is ready for operation.
Flashing ORANGE
The device is booting.
STATUS-LED
LED display
Status
OFF
The device is booting.
Flashing GREEN
The device has been started; the LED simulates a
"heartbeat". The flashing interval increases
depending on the device utilisation.
Explanation:
The green "Power/Boot" LED lights up as soon as the
INTERCOM
MODULE is supplied with power. Two
or three seconds after the power supply has been switched on, this LED also starts to flash red (flashing
orange) until the booting process has been completed. Then the LED is permanently illuminated green,
while the "Status" LED flashes green (simulates a "heartbeat"). The flashing frequency increases
depending on the device utilisation.
The
INTERCOM
MODULE takes for starting approx.
2 minutes
for starting.