Mounting INTERCOMMODULE IP
Documentation
INTERCOMMODULE
8 BAB TECHNOLOGIE GmbH
INTERCOM
MODULE
Figure 2: Connection drawing
INTERCOM
MODULE
2
MOUNTING INTERCOMMODULE IP
The device on picture is the
INTERCOM
MODULE IP, DIN-rail housing 4 units. Dimensions (width x height
x depth): 70 x 90 x 63 mm
So that the power supply can be connected easily, the screw-type terminals (see figure below)
can be taken off.
Now the cable of the power supply is connected to the screw-type terminals (see figure below).
Please observe the
polarity!
Next, the screw-type terminals can be inserted again on the
INTERCOM
MODULE.
Now the device can be snapped onto the DIN rail, according to DIN EN 60715.
INTERCOM
MODULE features
(1)
Power supplier via screw-type terminal 12-32V DC
(2)
RJ45-female connector for Ethernet LAN
(3)
USB-terminal (not in use)
(4)
Power / Boot LED
