B9Creations B9Clean, Руководство пользователя, Страница: 19 / 25

9.1.2 Build Table Cleaning
Remove the Build Table from the hanging arm before attempting to remove a 3D printed part from the
Build Table.
NOTE
Do not use metal scrapers or metal tools which can scratch the Build Table to remove a 3D printed part.
9.2 Isopropyl Alcohol
9.2.1 Replacement
The isopropyl alcohol in the outer container can be used for multiple cleaning cycles, but the cleansing
effectiveness of a reused batch of isopropyl alcohol will decrease with each cleaning cycle it is used
depending upon the resin used and part geometry. It is solely at the discretion of the operator to
determine when the isopropyl alcohol is to be changed.
9.2.2 Disposal
Isopropyl alcohol is classified as a hazardous waste in many countries and may require special disposal.
Contact the organization responsible for your local hazardous materials regulations for more information.
9.3 Non-Repairable Items
There are no replaceable electronic parts or replaceable wear parts on the B9Clean. All parts are rated for
long life. The B9Clean is designed for an estimated life of 5 years. Items in need of replacement must be
replaced by B9Creations, LLC, service staff unless included in the Replacement Pack available for purchase
at shop.b9c.com.