B.Well WA-55, Инструкция по эксплуатации

Страница: 17 / 68

Instructions manual
WA-55
17
En
5.6. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for any reason (e.g. the patient feels unwell), the Start button
can be pressed at any time. The device then immediately lowers the cuff-pressure automatically.
5.7. Memory – storage and recall of the measurements
The blood-pressure monitor automatically stores each of the last 60 measurement values with date & time. By pressing the «Memory» button, the last
measurement (MR60) as well as the further last 59 measurements can be displayed one after the other. If an irregular heartbeat interval was detected in any
measurements stored in memory, the icon will be displayed; Data obtained in 3 Check mode are indicated by a « » symbol. To see the measurement
results of the second user first switch to the second user (see point 4.5.), then repeat the instructions above.
5.8. Clear all values
Memory full
When the memory has stored 60 results, the memory is full. From this point onwards, a new measured value is stored by overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove all stored values, hold down the «Memory» button (the instrument must have been switched off
before hand) until «CL» appears and then release the button.
To remove all values of the second user first switch to the second user (see point 4.5.), then repeat the instructions above. Individual values cannot be
cleared.
(M60: Values of the last measurement) (M59-M1: Values of the measurement before)