B-TEK Scales T405S, Руководство по обслуживанию

Страница: 66 / 156

66 T405S Indicator Service Manual
6 ADMIN level menus
SELEct Use this to select Port 1 and Port 2 ( Port1-2 ) or just Port 1 with
full hardware flow control capability ( Port1-h ).
6.5.2 Ethernet
E-nEt Use these menu items to setup the Ethernet port.
iP Addr Use this to key in the static IP address of the indicator.
The IP address is the unique address for a device which is part
of an Ethernet network. IPv4 is supported by this indicator.
The address is a numeric entry in four parts or octets (###.
###. ###. ###).
Key in each octet and press ZERO to accept it.
E-net
DHCP
On Off
Conn.No
E-net 1 E-net 5
IP Addr
Gateway Subnet
1 xx
2 xx
3 xx
4 xx
1 xx
2 xx
3 xx
4 xx
1 xx
2 xx
3 xx
4 xx
Port 1 Type 1 Host 1
Off Client Server
1 xx
2 xx
3 xx
4 xx
Key in
1 thru
65535
The DHCP setting is oFF by default so the indicator will use the entered IP address
for connecting directly to a PC or other static IP address devices.
If DCHP setting is on the Ethernet settings must be assigned by the network DHCP
server
Typically devices within a network share the same address for the first three octets
(network address) and each device will have a unique setting or value for the fourth
octet (device address).