B-TEK Scales T405S, Руководство по обслуживанию

Страница: 130 / 156

130 T405S Indicator Service Manual
* the “Low Weight Value” and “High Weight Value” only apply when the Output mode selection is Act-In or Act-Out
700 X X X X Indicator Input Status Byte X X X X X X X X X X
Bit 0 = Input #1, #2 and #3 is OFF
Bit 1 = Input #1 is ON
Bit 2 = Input #2 is ON
Bit 3 = Input #1 and #2 is ON
Bit 4 = Input #3 is ON
Bit 5 = Input #1 and #3 is ON
Bit 6 = Input #2 and #3 is ON
Bit 7 = Input #1, #2 and #3 is ON
800 X X X X Indicator Output Status Byte X X X X X X X X X X
Bit 0 = Output #1, #2 and #3 is OFF
Bit 1 = Output #1 is ON
Bit 2 = Output #2 is ON
Bit 3 = Output #1 and #2 is ON
Bit 4 = Output #3 is ON
Bit 5 = Output #1 and #3 is ON
Bit 6 = Output #2 and #3 is ON
Bit 7 = Output #1, #2 and #3 is ON
900 X X Remote PB Zero Key X X X X X X X X X X
These value are configuration dependent. The
following commands will change their value or function
if the register which is mapped from the host changes
at any time. XOR the mapped register with a "1" to
toggle the register every time the XOR is executed.
901 X X Remote PB Tare Key X X X X X X X X X X
902 X X Remote PB Print Key X X X X X X X X X X
903 X X Remote PB Accumulate Key X X X
904 X X Remote PB Units Key X X X X X X X X X X
Token
SMA protocol PLC Protocol Description of Network Token Data Type T405S Standard Applications GTN App. Notes
Set XVS Get XVG Inbound Outbound INTEGER FLOAT STRING General Accumulate Counting Checkweighing Batching Peak Hold Remote Display In-Motion In/Out