IR-B02 Page 2
equipment and facility engineering
2. Safety regulations and maintenance advices
The B-TEC GmbH machines are operationally safe and are constructed according to the state of the
art. Due to the nature of the processes there are processes and parts that cannot be protected
without impairing operability and functionality. Improper use can endanger the health of operator
and of other and cause damage to the device itself or to other materials and assets. B-TEC GmbH is
not liable for any damages resulting from improper or incorrect use.
There is no liability for damages or injuries resulting of the following situations:
Oblivion of the instructions given in this manual
Changes of technical product specifications
Change or break the safety device
2.1 Work area
It is not allowed to use this machine in an explosive or combustible environment; otherwise it
may lead to fire.
In case the machine is used in a baking house, it is a must to purify the in-house air first.
Be careful of the uneven floor when moving the machine to avoid any overturn.
Avoid any accident caused by random placement and dark lights. Please keep the site clean with
enough light.
Do not use this machine when it is rainy or damp. Water coming into the machine may lead to
electric shock or damage to the machine.
For outdoor use, please use the outdoor-specific cables marked with “W- A” or “W” for
avoidance of electric shock.
Do not use this heater in the immediate surroundings of a bath.
keep the working area clean and free of any obstructions, oil, waste article or other broken
parts.
2.2 Use
Special attention should be paid to the current operation for safety. The operator is not allowed
to operate the machine when he gets drunk or takes drugs, otherwise miss- operation of this
machine may lead to serious injury and even death.
Proper Dressing: It is not allowed to wear too loose clothes and accessories. Please bind your
hair if it is too long.
Avoidance of Accidents: make sure that the power switch is closed when connecting with the
power supply. The opened switch may result in accident.
When the machine is started, the wrench or any adjusting tools should be avoided to touch the
live part of the machine, which may result in electric shock.
Any unconscious start of this machine should be avoided.
When you leave, make sure the power is shut down and unplugged.
It is not allowed to knock or crash the equipment.
It is not allowed to insert any hard object into the emitter.
Before using remove any part of the packaging.
Remove all objects in front of the pipe before starting.
Read and follow this Instruction manual and the safety instructions carefully before
commissioning!
