Cleaning Device d-800 Page 3
equipment and facility engineering
2. Intended use and range of application
The spray-gun cleaner d-800 may only be used for its intended purpose.
This unit is not intended for purposes beyond the following terms and
the manufacturer/supplier is not liable for any damages resulting from
it.
Intended use:
The intended use of this device is to clean spray-guns or ink-soiled pieces/tools (e.g. stirring rods,
mixing bowls etc.).
This device is suitable for:
Solvents (former danger classes A I, A II, A III according to VbF) and
Nonflammable, water-based cleaners for water-soluble lacquers according to chapter 4.
Not allowed are solvents that contain more than 65% of acetone.
This device may only be used for commercial use.
This device is classified as machine category 2, group II, machine type explosion group II B and can be
used in zone 1.
See also device type sign:
II 2 G c II B T6
An extended or other use of the device must be coordinated with the manufacturer in advance and
approved by the manufacturer. The device must not be used in continuous operation (for example,
serial production)!
In case of improper use of the cleaning device there is a risk to the health of the user or a third party
as well as a deterioration of the device or other property and assets.
Requirements for the user personnel
The equipment may only be used by qualified personnel who, by virtue of their training, knowledge
or experience, ensure proper handling and are aware of the dangers (for example, by reading the
operating instructions).
Liability
The cleaning device is built according to the state of the art, tested and operationally safe. Liability
for the functioning of the device is in any case attributable to the operator as far as the device is
improperly maintained or repaired by persons who are not authorized by the manufacturer and / or
supplier, or if a handling which does not correspond to the intended use is carried out. The user is
obliged to operate the device only in perfect condition. The manufacturer is liable for errors or
omissions - to the exclusion of further claims - only within the scope of the statutory warranty
obligations. We reserve the right to make technical changes at any time with regard to the
continuous development and improvement of our products. Such changes, mistakes and misprints
do not constitute a claim for damages. Only original spare parts and accessories are to be used. The
manufacturer and / or supplier are not responsible for damage caused by ignoring the instructions in
