YCJSF Series
11
L
IGHTING
I
NSTRUCTIONS
A.
To light pilot. Push in flame safeguard button on bottom RHS of front panel.
B.
Hold pilot in and turn pilot gas cock anti-
clockwise to “ON” po
sition.
C.
Press piezo button on bottom LHS front panel while still holding in the flame safeguard button. Continue to
hold in flame safeguard button for 25-30 seconds.
D.
Check whether pilot is alight by looking through the observation hole at the bottom of the front panel left of
centre. If not alight repeat procedure 1. To 3.
E.
Light main burner by turning the main burner control (red handle) anti-
clockwise to “ON” position.
F.
Regulate size of flame with the burner control.
S
HUTDOWN
P
ROCEDURE
A.
To turn pilot
“OFF”, turn knob clockwise to ‘OFF’ position.
B.
Ensure main burner and pilot are extinguished.
NOTE:
This appliance should burn with a blue flame. If the appliance is burning with a yellow flame and cannot be
adjusted to burn correctly, please turn the appliance off and contact B&S Commercial Kitchens Pty Ltd or their
authorized service agent.
T
ELESCOPIC
L
AUNDRY
A
RM
-
M
ANUAL CONTROL
The telescopic laundry arm serves the purpose of filling the steamer pot with water during the cooking cycle and for
cleaning the appliance. To activate;
1.
Locate spindle on front panel with ‘Spout’ sticker located above it.
2.
Turn spindle anti-clockwise to activate water from laundry arm.
3.
To cease water flowing from laundry arm, turn ‘Spout’ spindle clockwise.
O
PERATING
P
ROCEDURE
–
Y
UM
C
HA
S
TEAMER
1.
Turn main gas valve to “OFF”
.
2.
Fill water pot by placing laundry arm over water pot inlet and turning on the water control.
3.
Tu
rn main gas valve to “ON”.
4.
Once water in water pot has boiled, turn main gas valve to “OFF”.
5.
Place product on Yum Cha plate. If using more than one tier of the Yum Cha support, ensure tiers are
securely interlocked.
6.
Tu
rn main gas valve to “ON”.
7.
Position the laundry arm over the water pot inlet and turn on a minimal flow of water to fill the pot whilst in
operation.
Once
cooking cycle is complete, turn main gas valve to “OFF” position,
turn water cooling and laundry arm water
supply ‘OFF’
and remove product.
Содержание YCJSF-1
Страница 3: ...STANDARD WARRANTY CONDITIONS 15...
