B/R/K ZIRCON, Инструкция

Страница: 10 / 12

Removal of labels Wetten the label in very hot water and remove it. If traces of glue
remain, soak a bit of cotton wool in alcohol and wipe.
Use of abrasive pads This type of wire mesh scratches the surface of the pressure coo
ker. Rub horizontally and not vertically.
Use of detergents Do not use disinfectants containing bleach or other detergents
containing chlorine (Cl).
Burned food Add some water and ammoniac detergent and leave to rest for a
few minutes. Wash the piece normally.
Limescale stains (whitish stains) Add a bit of vinegar and water and heat the pressure cooker for a
few minutes. Leave to cool and wash normally.
Rust stains (brownish stains) Do not use steel wire pads when cleaning stainless steel parts. This
type of pad may leave rust stains, permanently damaging the sur
face of the piece. Use stainless steel pads.
Food stains Add some bicarbonate of soda and water and heat the piece for a
few minutes. Leave to cool and wash.
Excess heat stains (coloured stains) Clean the piece with a 10% nitric acid diluted solution, or use brigh
teners for chrome items
10
UNKEEP AND MAITENANCE
To keep your pressure cooker always in good shape for a long
period of time:
1.) Never heat an empty pressure cooker. This can cause damage of
your pressure cooker.
2.) Salted water from boiling, and water full of cleaning products,
should not be in contact with the pressure cooker for long periods.
3.) When cooking roasting meat in the pressure cooker, heat the fat
progressively before roasting the meat.
4.) Lubricate the centre axis with cooking oil if you find that the lid
is hard to lock.
5.) Replace the sealing ring every year or at least every two years. It
will need to be replaced early whenever the following occur:
• Cracks or dents
• Deformations
• Dark appearance
• Lack of flexibility
Any of the aforementioned irregularities may prevent the correct
sealing or closure of the pressure cooker.
To place a new gasket: (include image)
• Select a B/R/K sealing ring identified in the table (page 05)
• Place the ring on the inner edge of the lid, checking that it is
adjusted and properly placed.
Stainless steel pressure cooker
OCCURRENCE:
RECOMMENDATION: