en
22 / 76
7.
Faults and fault rectification
Check any faults in the appliance against the following table:
Fault
Possible cause
Action
The green and
yellow indicator
light does not il
luminate when
switched on.
Main switch before appliance
not turned on.
Turn on main switch.
There is no power supply at
all.
Inform the power supply company
.
Mains fuse on site has
tripped.
Possible faults on the appliance must
be checked by an authorised Customer
Service agent.
Reset the circuit breaker.
The appliance is
switched on but
does not heat
up.
The appliance is overheated.
Allow the appliance to cool.
If the fault continues to occur, contact
the authorised Customer Service.
If you cannot remedy the fault,
‒ switch off the appliance and disconnect from the mains,
‒ do not open the housing,
‒ contact the authorised Customer Service agent.
8.
Technical specifications
Hotplate
BC HP 700
Item No.
00574213, 00574369
Total connected load
0.7 kW
Voltage
230V1 N50/60Hz
Fuse
1 x 16 A
Thermal output, sensitive
0.10 kW
Thermal output, latent
0.14 kW
External dimensions (LxWxH)
400 x 620 x 240mm
Weight
approx. 18 kg
Degree of protection against water
IP X4
Appliance noise level
< 70 dB (A)
We reserve the right to make technical changes!