B.Pro B.PROTHERM BPT 820 EB, Перевод оригинальной инструкции по эксплуатации

Страница: 28 / 48

B.PROTHERM stainelss steel, heated
– 24 –
Help in the event of problems
Operation indicator LED does
not light up – no mains voltage in
the unit
Operation indicator LED
illuminates, but food is not
sufficiently temperature
maintained.
Operation indicator LED
illuminates, but unit interior
remains cold
Corrosion of stainless steel parts
Cause Action
Power plug is unplugged.

Plug the power plug into the socket
outlet.
Power cable is damaged; e.g. a
wire is broken (can also occur
without external damage).

Have power cable replaced by a
facility authorised to carry out repairs.

Chapter "Repairs" on page 33.
Customer-accessible fuse
(household fuse) is defective.

Check customer-accessible fuse and
replace it if necessary.
Unit electrical system is
defective.

Notify a facility authorised to carry out
repairs.

Chapter "Repairs" on page 33.
Cause Action
Food inserted too cold into unit.

Load the unit with sufficiently heated
food only.
Temperature setting set too
low.

Set a higher temperature.

Section "Setting the setpoint
temperature" on page 14.
Unit electrical system is
defective.

Notify a facility authorised to carry out
repairs.

Chapter "Repairs" on page 33.
The temperature limiter of the
convection heating module
was triggered.

Notify a facility authorised to carry out
repairs.

Chapter "Repairs" on page 33.
Cause Action
Unit electrical system is
defective.

Notify a facility authorised to carry out
repairs.

Chapter "Repairs" on page 33.
Cause Action
Incorrect handling/care.

Remove areas of corrosion.

Section "Removing areas of
corrosion on stainless steel" on
page 30.

Ensure proper handling/care.