B.Pro B.PROTHERM BPT 1020 EUK, Перевод оригинальной инструкции по эксплуатации

Страница: 17 / 48

B.PROTHERM Stainless-Steel, Cooled
– 13 –
Temperature regulation –
Overview
(1) Temperature display: In refrigeration mode this shows the actual temper-
ature in the unit and when the "SET" button is pressed it shows the set-
point temperature.
(2) "Refrigeration unit in operation" LED: This is illuminated when the refrig-
eration system is running.
(3) "Defrosting" LED: Illuminates while defrosting.
(4) "Fan in operation" LED: This is illuminated when the fan is running.
(5) "Refrigeration ON/OFF" button: This starts or stops refrigeration.
(6) "SET" button: This allows you to change the setpoint temperature using
the "UP" and "DOWN" buttons.
(7) "DOWN" button: Lowers the setpoint temperature and acknowledges a
temperature alarm.
(8) "UP" button: Increases the setpoint temperature or starts manual
defrosting when held longer (three seconds).

The buttons must be held down for about one second and an action is
triggered.

When the refrigeration system is running, the "Refrigeration unit in oper-
ation" LED will be illuminated. When the set setpoint temperature is
reached, the refrigeration switches off and the LED "Refrigeration unit in
operation" goes out during this time.

The fan is also always operating while the refrigeration is switched on.

The fan will also run during defrosting, which starts either automatically or
when the "UP" key is pressed. During this period, only the "Defrosting"
and "Fan in operation" LEDs will be illuminated.