3
Safety Precautions
1.
Ensure that the power plug is connected to a correctly designated electric
socket as specified on the rating plate.
2.
If the power cord is damaged, it must be replaced by the manufacturer or a
qualified service agent.
3.
The appliance is not intended for usage by people with reduced physical, sensory or
mental capabilities unless they are under the supervision of or have been given
instruction by a person who is responsible for their safety.
4.
When in the presence of the appliance, children should be supervised.
5.
The appliance is not a substitute for proper ventilation or regular vacuuming and
should not be used in place of an extractor hood or stove top range hood.
6.
Ensure the power socket is in good condition and properly connected. Ensure that the
appliance is properly connected and that the plug is not over-loaded or over-heated.
7.
Only use the appliance on a dry, stable and level surface.
8.
Ensure that the appliance operates at a minimum distance of 10 cm adjacent to walls
or objects.
9.
Do not push, lean against or exert excessive force on any part of the appliance. Do not
stick sharp objects into any part of the appliance.
10. If the HEPA Filter or/and NCCO Reactor is not installed properly, the appliance would
not operate.
11. Maintain good air circulation when using the appliance.
12. Prior to cleaning and maintenance, the appliance must be disconnected from the power
supply.
13. When the appliance is turned on for the first time, warm air with mineral smell may be
released from the air outlet. This is normal as catalytic oxidation is taking place inside
the NCCO Reactor.
14. The appliance is equipped with a special protection feature. It will stop operating with
indicating light off for 30mins. for every 8 hours’ non-stop operation. After that the
appliance will resume operating automatically.
