6
7
1. Please carefully read and retain the operation manual for future reference.
2. Remove all packaging materials, wipe all removable parts and grooves by a soft and dry cloth, then reassemble
all these parts.
3. Place the unit at a dry and even place. Keep the unit at least 15cm away from wall or surrounding objects for
normal operation.
4. Check power socket and all external power cords to meet operation requirements. Make sure the unit has been
connected with power supply before operation.
5. The unit is installed with inductor to induce filters' location. If the filters have not been properly installed, the
unit won' t operate.
6. When first switched on there will be warm air. This is perfectly normal and is due to special manufacturing
technique of the NCCO Reactor.
Setup
Before Startup
For the first-time operation of the unit:
Notice
■
Please press filters with force for proper installation.
Setup
Operation Instructions
Installation Procedures:
1
2
Simultaneously press the two buckles to
open Back Cover.
Before installing filters, please remove all
packaging materials.
Install NCCO Reactor, HEPA Filter and Pre-filter in sequence into HEPA Filter Frame. Clicking sound should be
heard indicating successful filters installation. Re-install Back Cover to finish the installation process.
3
Control Panel Buttons:
ON / OFF Button
Air Speed Slider
Display Screen
Filter Installation Indicator
Eco Mode Button
Factory Setting: The default air speed is 03. When unit is running, if user deliberately
disconnects power supply and then connects power supply to turn on unit, the air
speed will be reset to default value.
Memory Function: When unit is running, if user presses the ON / OFF Button to turn
off unit and then turns on unit again, the unit will operate with the last air speed
(Excluding SS Mode).
1. ON / OFF
ON: Crystal ring should be heard indicating Power On after the unit has been
connected with power supply. User shall press the ON / OFF Button to turn on unit,
where indicators at control panel will be extinguished 1 minute after the unit has
been turned on.
OFF: Press ON / OFF Button again to turn off unit.
2. DEFAULT AIR SPEED & MEMORY FUNCTION
Increase Speed: Press the Air Speed Slider from left to right to increase air speed.
Reduce Speed: Press the Air Speed Slider from right to left to reduce air speed.
User also can press the Air Speed Increase / Reduce Indicator to directly increase /
reduce air speed.
3. AIR SPEED MODE
Increase Speed
Reduce Speed
