B medical systems MT100, Инструкция по эксплуатации

Страница: 17 / 28

17
5.2 Main Switch
• Switch on the unit by turning the switch to the “ I ”- position.
5.3 Power Indicator
• When switched on, the green power indicator lamp lights up to show that there is power available.
• In Powerfail-mode, the colour changes to red (see chapter “Powerfail-Alarm”)
5.4 Mute Button during Powerfail-Alarm
• In case of power failure (while unit is being operated), a visual and an acoustic alarm is generated. The
buzzer can be muted by pressing the mute button (see chapter “Powerfail-Alarm”).
5.5 Electronic Control Unit
• The electronic control unit controls and regulates the temperature set-point of the unit.
• During standard conditions the electronic control unit displays the interior temperature of the device in °C.
• Additionaly to this standard view, the electronic control unit can also illustrate different symbols :
compressor is running (cooling mode)
inner fan is running
heater is running (heating mode)
unit is running in 22°C temperature set-point mode
temperature alarm
Defrost cycle is running
• For safety reasons all parameters on the electronic control unit are blocked and cannot be changed.
5.6 Temperature set-point key switch
• Turn the switch to the desired temperature :
+4°C for storage and transport of red cells
+22°C for storage and transport of platelets.
• To avoid any errors during operation, remove the key after choosing the right temperature set-point.
AUX
22ßC
4ßC
Power
0
I
Electronic
Control Unit
Main Switch
Temperature
set-point key switch
Power Indicator
Mute Button
for Powerfail-Alarm
5 Control Panel
5.1 Overview