B medical systems MT100, Инструкция по эксплуатации

Страница: 8 / 28

8
• Not activating the breaks, may cause the unit to roll away and cause damage to the unit and physical injury.
• Not securing the device with the appropriate belt system, may cause damage to the unit during transit and
physical injury.
• The device can be run on DC with a battery charger connected to the battery. However, it should never be
run directly from a battery charger. This will damage the compressor and void the warranty.
• Makse sure the adequate temperature setpoint is selected for the stored Product
2.1.2 Cautions
• Ensure that there is sufficient room around the device for air circulation. Please refer to the installation
information regarding this point.
• Do not locate the device below a ceiling fan or right next to air-conditioning equipment.
• The sound intensity level produced by the appliance is lower than 70 dBA (measured at a distance of 1
meter).
• Check whether the device has been delivered undamaged. If you find that damage has occurred in transit,
immediately contact the delivery service or relevant sales outlet, submitting the delivery note or proof of
purchase.
• Do not operate a device that has been damaged in transit! If you are unsure, contact your sales outlet and
ask them.
• Follow the instructions for transport and storage of the product marked on the packaging.
• The device must be transported in an upright position only (maximum inclination 30°).
• Document any change of configuration and report it to Technical Support.
• All connected devices/signal equipment must be providing reinforced or double insulation for protection
against electric shock.
• Upon the occurrence of an alarm situation, attempts must be made to discover the reason for the alarm and
resolve it as quickly as possible. If that is not successful the necessary measures must immediately be taken
so that the stored goods are not damaged.
• Optimal function of the appliance is given at an ambient temperature and maximum relative humidity
indicated in the technical data, (see chapter 11).
• The device must be set up in a dry well-ventilated place. Avoid direct sunlight or locating it close to a heat
source. The location must be proctected against rain and dust.
• This device cannot be used/is not for use in facilities at altitudes of 2000m or higher.
• The use of hydrogen peroxide H2O2 (VHP) for the disinfection (sterilization) of the appliances is not suitable.
This procedure may be applied exclusively with dedicated appliances.
• Other than the cleaning procedure described in this manual, follow the internal policy and procedures.
• Before using the refrigerator it should be cleaned inside and outside.
• For cleaning, use only gentle cleaning agents. Never use aggressive or caustic cleaning agents, scouring
powder, steel wool, abrasive sponges or chemical solvents. When cleaning, make sure that no fluids of any
kind run into the ventilation housing.
• For disinfecting, we recommend all the surface disinfecting agents commonly used by the customer,
provided they are recommended by the national organizations. For disinfecting small areas, we recommend
using a concentrated alcoholic agent.
• Before being loaded, the unit must have reached the set point temperature.
• The load should only be stored in the provided baskets and should not exceed the storage areas. Do not
overload the device.
• Different blood or plasma types should be sorted and stored in a manner for the User to identify these with
ease.
• The loading must never obstruct the air-inlet-openings.
• Do not store warm items in the devices. They are not designed for fast cooling of warm items.
• Avoid long and / or frequent door openings to prevent that the inner temperature rises to high.
• Make sure that the door is correctly closed securely.