B medical systems MRB 3000 SDD, Инструкция по эксплуатации

Страница: 7 / 28

7
2.1.1 Warnings
• Do not use the device outdoors. Current leakage or electric shock may result if the unit is exposed to
rain water.
• Before cleaning or carrying out maintenance work, always switch the device off and disconnect the mains
plug. Working on the connected appliance may cause electric shock or fire.
• During defrosting, water will leak from the unit. Collect this water so that it does not lead to a risk of
slipping for passing persons.
• Make sure that no water penetrates the ventilation slots of the unit.
• Before cleaning or carrying out maintenance work, the contents preserved in it will have to be removed
and temporarily stored in another working refrigerator.
• Make sure the condensation water is removed on a weekly basis. Increased condensation water inside
the device may lead to malfunctioning of the device.
• Inspect the unit on a regular basis for damaged parts. Only genuine spare parts may be used. Use of
any other parts may affect the performance or cause physical injury or damage to the equipment.
• The wall socket must be easily accessible.
• When disconnecting, always pull the plug and never the cable. Pulling the cord may result in electric
shock or fire by short circuit.
• These devices must only be used by adults. Do not allow children to play with the device or touch the
controls.
• Ensure that the unit is steady and perfectly straight and does not knock against anything next to it. If
the floor is not strong enough or the installation site is not adequate, this may result in injury from the
unit falling or tipping over.
• When transporting or moving the device, be aware of its weight. Do not try to move a fully loaded device.
• Ensure that the connecting cable is not squeezed or bent when the unit is being installed or moved.
Deterioration of the insulation may cause current leakage or electric shock.
• Never install the device where acid or corrosive gases are present as current leakage or electric shock
may result due to corrosion.
• Before connecting, check whether the details on the nameplate correspond to local values. Use of a
voltage or frequency other than that on the nameplate may cause fire or electric shock.
• Do not store flammable or explosive substances inside these appliances (e.g. aerosols with
flammable propellant). These may cause explosion or fire.
• Make sure that no sharp or pointed objects come into contact with the cooling system. The
cooling system contains flammable refrigerant. Both the appliance and the products stored
inside can be severely damaged if this system starts to leak.
• Do not insert metal objects such as a pin or a wire into any vent, gap or any outlet. This may cause
electric shock or injury by accidental contact with moving parts.
• Disconnect the power supply prior to any repair or maintenance in order to prevent electric shock or
injury.
• Do not touch any electrical parts (such as power supply plug) or operate switches with a wet hand. This
may cause electric shock.
• All installation work and adjustments to the refrigerator must be carried out by qualified personnel. Work
performed by persons with insufficient technical knowledge may adversely affect the performance or
cause physical injury or damage to the equipment.
• When the unit is in its final position it is important to immobilise the unit using the feet.
• It is of utmost importance that the icelining elements are in place. Make sure that all these elements are
in place before starting the unit. Never remove the icelining elements from the unit.
• Make sure that the lid is securely closed by closing the latches.
• Note that the unit may be locked using a key. Always ensure that the key is available to the user.
• Before scrapping an old unit, remove the door so that children cannot lock themselves inside while
playing.
• Before scrapping the unit, remove the lead accumulator and dispose of it separately.
• When disposing of the unit, make sure that it does not get too hot, as combustible gas would cause the
insulating foam to froth up.
• The appliances contain environmentally friendly refrigerant. Before disposing of the appliance, the
refrigeration circuit should be opened outside so that the refrigerant can escape.
Attention: The refrigerant is flammable!
• Make your contribution to saving the environment. Bear in mind that orderly and proper disposal is
required. Packaging materials and devices are always recyclable and should be taken for recycling.