B+K precision Sefram DAS1800, Руководство пользователя, Страница: 20 / 73

Sefram CHAPITRE 3. GETTING STARTED
Chapitre 3
Getting started
3.1 | Installing and removing acquisition modules
.
Module installation and removal must be carried out with the power off. When doing so,
switch off the device and ensure that no cables are connected to the module inputs.
Add an acquisition module :
The module plugs into the device as a simple way. Simply follow the keyed connection (1) and guide the
module to the backplane to connect to the connector (2) . Press to ensure a good connection. Once connected,
use a Phillips screwdriver to tighten the two screws on either side of the module (3).
ò
Modules are detected at startup.
F
IGURE
3.1 : Add an acquisition module
Remove an acquisition module :
To remove an acquisition module, loosen the two screws on either side of the board
(3)
. Pull on the module to
disconnect it.
3.2 | File creation
Before starting a measurement campaign, we recommend that you organize your files in advance. To do this, go
to "File Manager" in the navigation bar.
DAS User manual 20