RELEASE DATE
7-13-16
REFERENCE
NUMBER
INS-1341-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
Installation
PROJECT:
TYPE:
WIRING DIAGRAM
LINE
12V
Fixture
COM
Remote
Transformer
COM
1. Remove temporary cover.
2. Make connections using silicone filled wire nuts
(provided) from OptiLock® to secondary wiring.
See wiring diagram.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
HP
2
SERIES™
Shallow Housing - Halogen (MR16)
Remote Transformer Installation Instructions
3. Place OptiLock® in HP2 housing and align
keyhole notch under one of (3) #8 screw heads.
Rotate horizontally to desired aiming position,
then tighten (2) #8 Phillips screws using Phillips
screwdriver. Install proper MR16 halogen lamp.
6. Remove any dirt or debris in O-ring groove near
top of housing. Place O-Ring inside of groove.
Failure to clean groove of debris will cause
fixture to fail and void product warranty.
7. Install faceplate using 1/8” Allen wrench and
hand-tighten the (5) #10-24 faceplate screws in
a star pattern to 30 in-lbs. min.
Do not use a power tool to install screws. Do
not exceed 40 in-lbs.
4.
For Optional Accessory Holder:
Insert
accessory holder tabs into slots on OptiLock®.
5. Aim vertically by turning the thumbscrew on
OptiLock® assembly.