RELEASE DATE
01/20/2021
REFERENCE NUMBER
INS000929.2
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
Nite Star (NS)
Low Voltage
Standard Installation
Fixture Installation with Stake
4. Attach the fixture to the threads on the stake.
Make sure the stake is secured in the ground.
2. Remove the locknut from the fixture, leave
the o-ring on the threads.
5. Make watertight connections from remote
transformer to fixture leads using waterproof
wire connectors (by others).
See wiring
diagram.
6. Use a 5/32” allen wrench to slightly loosen
#10-32 stainless steel black oxide socket
head cap screw at the knuckle for aiming
purposes. Tighten to secure desired location.
LINE
12V
Fixture
COM
Remote
Transformer
COM
WIRING DIAGRAM
For use with 12VAC remote
transformer.
Finished Grade
1. Drive the stake into the ground with a mallet
or a small sledge hammer (by others). Make
sure the top is flush with the finished grade.
Finished Grade
3. Pull the fixture wire cable throught the
stake’s center where the hole is located. Silce
moved the fixture wire from under the stake
to the side to make a connection with the low
voltage direct burial cable (by others).
Ground wire connections is based off of
local code requirements.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
INSTRUCTIONS