Operating Manual
LK-IP/KNXs REG
90403
22
6.4.6
Device properties
In the ETS, some settings are displayed in addition to the parameter dialog in the properties dialog
(at the edge of the screen). The IP settings can be made here.
KNX addresses
The additional addresses for the interface connections are displayed in the topology view.
Each individual KNX address can be changed by clicking on the list entry and typing in the desired
address into the “Individual Address” text-field. If the text-field frame switches to color red after
entering the address, the address is already taken within your ETS project.
NOTICE
Addressing!
Make sure that none of the addresses above is already in use within your KNX installation.
