Operating Manual
LK-IP/KNXs REG
90403
28
Group telegrams (main groups 0 to 13)
Group telegrams (main groups 14 to 31)
Individually addressed telegrams
Broadcast telegrams
Acknowledge (ACK) of group telegrams
Acknowledge (ACK) of individually addressed telegrams
Disabling
No group telegram of these main groups is routed to IP.
Route
All group telegrams of these main groups are routed to IP independent of the
filter table. This setting is for test purposes only.
Filter
The filter table is used to check whether or not the received group telegram
should be routed to IP.
Disabling
No group telegram of main groups 14 to 31 is routed to IP.
Route
All group telegrams of main groups 14 to 31 are routed to IP.
Filter
The filter table is used to check whether or not the received group telegram
should be routed to IP.
Disabling
No individually addressed telegram is routed to IP.
Route
All individually addressed telegrams are routed to IP.
Filter
The individual address is used to check whether the received individually
addressed telegram should be routed to IP.
Disabling
No received broadcast telegram is routed to IP.
Route
All received broadcast telegrams are routed to IP.
Always
An acknowledge is generated for every received group telegram (from KNX).
Only if routed
An acknowledge is only generated for received group telegrams (from KNX)
if they are routed to IP.
Always
An acknowledge is generated for every received individual addressed tele
-
gram (from KNX).
Only if routed
An acknowledge is only generated for received individually addressed group
telegrams (from KNX) if they are routed to IP.
Answer with NACK
Every received individually addressed telegram (from KNX) is responded to
with NACK (Not acknowledge). This means that communication with individ
-
ually addressed telegrams on the corresponding KNX line is not possible.
Group communication (group telegrams) is not affected. This setting can be
used to prevent manipulation attempts.
