5. ROUTER DESIGN
5.7
Description of the front panel
On the front panel is the following:
Caption
Connector
Description
PWR
2-pin
Connector for the power supply.
ETH0
RJ45
Connector for connection into the local computer network.
ETH1
RJ45
Connector for connection into the local computer network.
WIFI
R-SMA
Connector for WIFI antenna.
Available only when the
router is equipped with WIFI module.
Table 3: Front panel description
Figure 15: Front panel XR5i v2E
5.7.1
Status indication
About router status inform one LED indicator on the front panel. ETH0 and ETH1 ports
have two additional LEDs that provide information about port status.
Caption
Color
State
Description
PWR
Green
Blinking
On
Fast blinking
Router is ready
Starting of the router
Updating firmware
ETH
Green
On
Off
Selected 100 Mbit/s
Selected 10 Mbit/s
ETH
Yellow
On
Blinking
Off
The network cable is connected
Data transmission
The network cable is not connected
Table 4: Status indication
12
23-05-16
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
w
w
w
.luco
m.d
e
inf
o@lucom
.de
