Bischoff & Bischoff GmbH | 16.06.2015
EN
11
10
TRIPLEX
| Electric Wheelchair
Electric Wheelchair |
TRIPLEX
3.3. Contents
After receipt of the goods, please check the contents for completeness
right away. The contents consist of:
• outer package
• electric wheelchair (ready for use incl. 2 batteries)
• VR2 control system (R-Net with electrical adjustable components)
• charging unit
• seat cushion
• set of tools
• instruction manual
3.4. Summary
push handles
backrest
control unit
arm rest
side part
seat cushion
lights
Indicator light
drive wheel
foot rest
steering wheel
01
3.5. Basic settings
It is necessary to adjust the wheelchair to your body size before first
use. This is the only way to ensure a physiologically correct posture
allowing for long drives without tiring. Below you find a description
of the basic settings of the wheelchair. You should carry out these
adjustments with the help of your medical supply dealer.
3.5.1. Mechanical footrests
Length of lower leg supports
• The lower leg supports can be adjusted from 47 to 55 cm.
• To do so, loosen the two allen screws.
• Adjust to the desired height.
• Tighten the screws again. Use medium-strength Loctite to lock
screws in place.
Make sure to always use two screws for secure
fastening!
Angle of footrest
• The angle of the footrests is adjustable in 25° steps.
• Loosen the screwing at the side of the footrest.
• Adjust to the desired angle.
• Tighten the screw again. Use Loctite 243 to lock screw in place.
Make sure to set the angle only within the marked
range!
02
03
