Bischoff & Bischoff GmbH | 04.07.2018
EN
21
20
PYRO START
| Lightweight wheelchair
Lightweight wheelchair |
PYRO START
5.3. Lap belt
There is also an optional lap belt available to order which secures
wheelchair users who do not have the required stability for sitting in a
wheelchair (Fig. 20).
•
The Pyro Start can be equipped with a seat belt on the backrest
tube.
•
Use the buckle to open and close the belt.
•
The length of the belt can be adjusted using the movable latch on
the belt.
6. Using the wheelchair
6.1. Getting in and out from the side
•
Move the wheelchair and the current or future seat as close beside
one another as possible.
•
If you want to switch from another wheelchair or indoor frame,
secure it by activating the locking brakes.
•
Secure the Pyro Start to prevent it rolling away unintentionally by
activating the brake lever on the left and right hand sides of the
wheelchair.
•
Swing away the padded armrest to the back.
•
Fold the foot plates to the side or remove the leg rests.
•
Now slide sideways onto the other seat.
•
Make sure that you sit as far back as possible in the seat.
•
Finally, return the leg rests to their original position.
Never climb on the foot plates! RISK OF TIPPING!
6.2. Getting in and out from the
front
•
First swing the foot plates up or remove the leg rests.
•
Move the Pyro Start and the current or future seating as close as
possible to the front of one another.
•
If you want to switch from another wheelchair or indoor frame,
secure it by activating the locking brakes.
•
Now slide onto the seat by turning your body.
•
Finally, return the leg rests to their original position.
20
