Rev: 03/2009
KNX-GSM Gateway
Page 15 of 19
©
b+b Automations- und Steuerungstechnik GmbH
KNX-GSM GATEWAY.DOC
First you select the up to 8 receiver of this message, by selecting the check boxes E1 to E8. In the
edit field „Group address“ you have to enter the address you want to react to. Next is the EIB data
type, possible are simply switches (1 bit), but also 8, 16 and 32 bit integer values, and floating point
numbers (16 and 32 bit formats are supported).
Simply press the „…” button to define the related message text:
Here you can define up to 100 different texts, by selecting a number in the list, entering the text, and
pressing the „Store text“ button. To use this text in a message, select the text in the list and press
“OK”:
