B+B SmartWorx Wzzard WSD2C31010, Руководство пользователя

Страница: 12 / 44

Wzzard
™
Sensor Edge Nodes
12
Install (2) 3.6 V AA Lithium Thionyl Chloride Batteries.
In most installations you will only need to place the batteries in the battery holder. But, in high vibration
environments, you should also use the included black battery retaining clip.
Do not use excessive force while placing or removing the clip, as you can break it. The best way to
remove the clip is to insert a small flathead screwdriver between the batteries and the clip (parallel to the
batteries) and give the screwdriver a gentle twist. This will remove the clip without damage.
Note:
As with all batteries, these are a fire, explosion, and severe burn hazard. Do not burn or expose
them to high temperatures. Do not recharge, crush, disassemble, or expose the contents to water.
Properly dispose of used batteries according to local regulations by taking it to a hazardous waste
collection site, an e-waste disposal center, or other facility qualified to accept lithium batteries.