OPEARTING MANUAL
Technische Änderungen vorbehalten
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-100 17.08.2015
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
2 / 88
CE-Konformitätserklärung
The device meets the following requirements:
EMC:
EN 61326-1:2006 (Essential test requirements)
EN 61326-2-3:2006
Safety:
EN 61010-1:2001
Laser safety:
EN 60825-1:2007
The product meets the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.
This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
.
Warranty
Should equipment defects occur despite careful quality control, please contact our customer service immediately. The warranty period is 24 months from the date of
delivery. After this period, the manufacturer gives a 6-month warranty on all repaired or replaced equipment components in the event of repair. The warranty does not
cover damage caused by improper handling, opening of the device or violence. The manufacturer is not liable for any consequential damages or in the event of
improper use of the product. In the event of a device fault during the warranty period, the device will be repaired or calibrated free of charge. The freight costs are
borne by the respective sender. The manufacturer reserves the right to exchange the device or parts of the device instead of a repair. If the defect is due to misuse or
violence, the costs will be invoiced by the manufacturer. In this case, a cost estimate will be prepared on request before the start of the repair.
Read this instruction manual carefully before the first use of the device.
In the interest of technical development, the manufacturer reserves the right to change the specifications specified in this manual.
[► References to other chapters]
Important notes are highlighted in grey
e
