AZZA PT-5IH, Руководство по эксплуатации

Страница: 24 / 26

PT-5IH
SYSTEM BOARD
AWARD BIOS SETUP
5.9 INTEGRATED PERIPHERALS
ROM PCI / ISA BIOS (2A59FXXX)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode : Enabled
PCI Slot IDE 2nd Channel : Enabled
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
USB Controller : Disabled
Onboard FDD Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART 2 Mode : Standard
Onboard Parallel Port : 378H/IRQ7
Onboard Parallel Mode : SPP ESC : Quit : Select Item
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Default
F7 : Load Setup Default
Fig. 5-8 INTEGRATED PERIPHERALS setup screen.
WARNING : The INTEGRATED PERIPHERALS in this screen are provided so that technical
professionals can modify the Chipset to suit their requirement. If you are
not a
technical engineer, do not use this program !
IDE HDD Block Mode :
This feature enhances hard disk performance, making multi-sector transfers instead of one sector per transfer.
Most IDE drives, except the very early designs can use this feature. Default is "Enabled".
UART 2 Mode :
This setting determines the IR port (CN 5) transmission mode. Supports both ASKIR and HPSIR.
Onboard Parallel Mode :
This setting determines the onboard parallel prot (CN 4) transmission mode. Supports either SPP, EPP/SPP,
ECP or ECP/EPP.
5-9