AZZA PT-5IH, Руководство по эксплуатации

Страница: 18 / 26

PT-5IH
SYSTEM BOARD
AWARD BIOS SETUP
The following pages will show the simulate screens of CMOS SETUP, each figure contains the setup items and
the default settings of them. Below each figure may or may not be contained a lists of function description for
commonly used settings. For the other settings' function description you needed, connet to us please.
5.4 STANDARD CMOS SETUP
ROM PCI / ISA BIOS (2A59FXXX)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
Date (mm : dd : yy) : Thu, May 11 1996
Time (hh : mm : ss) : 9 : 53 : 54
HARD DISKS
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master
Auto 0 0 0 0 0 0 Auto
Primary Slave
Auto 0 0 0 0 0 0 Auto
Secondary Master
Auto 0 0 0 0 0 0 Auto
Secondary Slave
Auto 0 0 0 0 0 0 Auto
Drive A : 1.44M, 3.5 in.
Drive B : None
Base Memory : 640 K
Extended Memory : xxxxxx K
Video : EGA/VGA Other Memory : xxxxxx K
Halt On : All Errors Total Memory : xxxxxx K
ESC : Quit : Select Item PU/PD/+/- : Modify
F1 : Help (Shift)F2 : Change Color
Fig. 5-3 STANDARD CMOS SETUP screen.
MODE :
For IDE hard disks, this BIOS provides three modes to support both normal size IDE hard disks and also disks
size larger the 528MB:
NORMAL : For IDE hard disks size smaller then 528MB.
LBA : For IDE hard disks size larger then 528MB and up to 8.4GB (Giga Bytes) that use
Logic Block Addressing (LBA) mode.
Large : For IDE hard disks size larger then 528MB that do not use LBA mode.Large mode
is a new specifition which may not be fully supported by all operation systems.
Now it can only be used with the MS-DOS and is uncommon.
Note : Some OSes (like SCO-UNIX) must use "NORMAL" for installation.
5-3