AZZA 6IL, Руководство пользователя, Страница: 19 / 70

PT-6IL
MAINBOARD
HARDWARE SETUP
6
2.
Look for the key bump on the Slot 1 as shown in Figure 3-3, align the notch key
hole on the Retention Mechanism with the key bump on Slot 1 and put Retention
Mechanism onto the Slot1 with a right and vertical direction. (the Retention
Mechanism can not be put onto the Slot1 completely if the direction is incorrect. )
S L O T 1
R e t e n t i o n
M e c h a n i s m
N o t c h K e y
K e y
Figure 3-3
3.
Lock the captive nuts of Retention Mechanism onto the RM Attach Mount (RMAM)
Retention mechanism
Captive nuts
The direction of
“bump” and “recess”
Slot1
Note: Some of the RM kits can be folded and fixed onboard from the factory, If you
found there is the RM kit installed on the board, you may unfold the RM kit and
start to install the processor.