8
Owner’s manual
EN
RECEIVER (back)
7. Antenna
8. DC input
9. Jack 6,3 mm mixed output
10. Balanced XLR mixed output
TRANSMITTER (top)
11. Gain adjust knob (adjustment of the
microphone’s sensitivity)
12. Transmitter’s power switch (ON /
Standby: the microphone is ON, but
without audible sound / OFF)
13. Clip-on/headset microphone input socket
MICROPHONE
14. Handheld microphone power switch (ON / Standby: the microphone is ON, but without audible
sound / OFF)
15. Battery compartment
16. Screw top
MICROPHONE/TRANSMITTER BATTERY REPlACEMENT
Handheld microphone:
Twist the screw top anti-clockwise and remove the top. Insert 9 V battery into handheld microphone
(pay attention to correct polarity).
Wireless transmitter:
Slide the front cover of the transmitter upwards. Insert 9 V battery into the transmitter (pay attention
to correct polarity).
Note
: If the signal from the microphone is off or dusky, the battery is flat; replace the battery.
