Firewall-VPN Pass Through
IPSec Pass Through:
IPSec (Internet Protocol Security) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow IPSec Pass through, click the
Enabled button. To disable IPSec Pass through, click the Disabled button.
PPTP Pass Through:
PPTP (Point-to-Point Tunneling Protocol) Pass through allows the Point-
to-Point (PPP) to be tunneled through an IP network. To allow PPTP Pass through, click the
Enabled button. To disable PPTP Pass through, click the Disabled button.
L2TP Pass Through:
Layer 2 Tunneling Protocol is the method used to enable Point-to-Point
sessions via the Internet on the Layer 2 level. To allow L2TP tunnels to pass through the
Router, click the Enabled button. To disable L2TP Pass through, click the Disabled button.
System-Admin
This page will allow you to change the Administrator passwords. You can also enable
Remote Management.
Device Name:
Enter a name for the AW-GR520 router.
New Password:
Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
Retype Password:
Retype the new password again.
Remote management:
Remote management allows the AW-GR520 to be configured from
the Internet by a web browser. A username and password is optional to require to access
the Web-Management interface. In general, only a member of your network can browse
the built-in web pages to perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
The port number used to access the AW-GR520.
Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the AW-GR520 and
8080 is the port used for the Web Management interface.
26
