Wireless-Basic Encryption Type – WEP 64/128bit
It is recommended to enable encryption on your wireless router before your wireless
network adapters. Please establish wireless connectivity before enabling encryption.
1. Select Encryption Type to WEP 64/128bit.
2. Next to WEP Key Length, select the level of encryption (64 or 128-bit) and either Hex or
ASCII. Hex - (recommended) Letters A-F and numbers 0-9 are valid. ASCII - All numbers and
letters are valid. 3. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter
this key exactly on all your wireless devices. You may enter up to 4 different keys.
4. Click Apply to save your settings. If you are configuring the router with a wireless adapter,
you will lose connectivity until you enable WEP on your adapter and enter the same WEP key
as you did on the router.
Wireless-Basic Encryption Type – WPA-PSK
It is recommended to enable encryption on your wireless router before your wireless
network adapters. Please establish wireless connectivity before enabling encryption.
1. Select WPA-PSK mode.
2. Next to Cipher Suite, select TKIP or CCMP (AES).
3. Next to WPA Pass Phrase (Pre-Shared Key), enter a key (pass phrase). The key is entered as
a pass-phrase in ASCII format at both ends of the wireless connection. The pass-phrase
must be between 8-63 characters. 4. Click Apply to save your settings. If you are configuring
the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on
your adapter and enter the same pass phrase as you did on the router.
15
