Network-LAN
This section will allow you to change the local network settings of the router and to
configure the DHCP settings.
IP:
Enter the IP address of the AW-GR520 router. The default IP address is 192.168.0.1.
If you change the IP address, once you click Apply, you will need to enter the new IP address
in your browser to get back into the configuration utility.
Subnet mask:
The default subnet mask is 255.255.255.0.
DHCP Server:
DHCP stands for Dynamic Host Control Protocol. The AW-GR520 Router has a
built-in DHCP server. The DHCP Server will automatically assign an IP address to the
computers on the LAN/private network. Be sure to set your computers to be DHCP clients by
setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
Router. The DHCP Server will automatically allocate an unused IP address from the IP
address pool to the requesting computer. You must specify the starting and ending address
of the IP address pool.
DHCP Server:
Choose the “Enable” button to enable the DHCP server or choose the
“Disabled” button to disable DHCP server function on your router
Address Range:
Enter the starting and ending IP addresses for the IP assignment from
DHCP server.
WINS:
Enter the Domain name (Optional).
Network-MAC Clone
The default MAC Address is set to the Internet port’s physical interface MAC address on the
Broadband Router. It is not recommended that you change the default MAC address unless
required by your ISP. You can use the Clone MAC of this PC button to replace the Internet
port’s MAC address with the MAC address of your Ethernet card.
13