9
Device Management
The devices windows will show up “device name” of wireless audio receiver connect to
the same network. Users can use “connect” and “disconnect” to connect 1 or more
device.
Note: AW -GA201 support multi-link feature, it means PC can steam music to 1 or more
devices. But due to system limitation, if AW -GA201 work as AP or RT mode, we
strongly suggest NOT to run “multi-link” feature on the device, otherwise it could be
cause audio stream quality issue.
AzureWave wireless audio utility includes 4 major page: Status, Advanced, Wizard and
About
Status Page
Status Page is consisting of two major features: Switch to PC Audio or Wireless Audio
and Multi-Device Management.
- Switch to PC Audio or Wireless Audio
Users choose “use PC’s Speaker” or “Use Wireless Audio” will switch PC audio to local
speaker or wireless audio.
- Multi-Device Management
All the audio AP/Receiver connects to same network will be displayed on utility, the
maximum quantity will up to 36 devices.
Utility will display device name and Owner’s Name (if somebody already connects to
audio AP/Receiver).
Advanced Page
-Buffer Mode
Buffer mode allows users to setup memory buffer size. Including Movies/Game
(200ms), Music(1 sec) and user-defined. Default is Music(1sec).
Bigger buffer will cause your PC and AW -GA100 audio transmission delay longer, but
also help you audio transmission more stable and reduce the possibility of audio broken
due to wireless signal interference
-Others setup.
Wizard
Choose Wizard icon, the utility will switch to Setup Wizard page.
Appendix A: Troubleshooting
This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked
Questions.” This appendix provides solutions to problems that may occur during the installation
