User Manual
Page 55
of 88
NOTE: You may have to search for your application’s
corresponding port ranges.
f.
Enter the
Open Port Start
and
Open Port End
values and
determine the Open Protocol to be implemented.
NOTE: You may have to search for your application’s
corresponding port ranges.
g.
Click
Save/Apply
button to apply changes.
To remove a port trigger:
a.
Tick the corresponding checkbox of the application.
b.
Click
Remove
to remove the port triggered application.
DMZ Host.
Allows you to assign a computer as a DMZ Host. It will
then receive all the data from the Internet that does not belong
to the list of applications configured in Port Forwarding.
To configure the DMZ host:
a.
Enter the
LAN IP address
of the PC you wish to set as DMZ
Host in the DMZ Host IP Address.
b.
Click the
Save/Apply
button to apply changes.