User Manual
Page 31
of 88
To add an Outgoing IP filter:
1.
Click the
Add
button.
2.
Input the preferred
Filter Name.
3.
Determine the
IP Version
that the filter will use.
4.
Select the
Protocol.
5.
Enter the
Source’s IP Address
, and
Source Port
.
6.
Input the
Destination IP Address
and
Destination Port.
7.
Click
Save/Apply
button to save changes.
To remove a filter:
1.
On the Filter table, tick the checkbox that corresponds to the
Filter Name that you wish to remove.
2.
Click
Remove
to remove the filter.