Aztech FG7008GR(AC) Скачать руководство пользователя страница 16

Страница: 16 / 88

User Manual

Page 16

of 88

Setup the Device

When installing the router, find an area where there are enough electrical

outlets for the router, the main computer, and your other computer devices.

NOTE: For Singapore Fibre Residential Customers, the FG7008GR(AC) auto-

detects the configuration of your fibre connection. Simply follow the steps

provided below and you may already surf the internet.

Power ON your FG7008GR(AC) by connecting and plugging its power

adapter to a power outlet.

Connect your ONT device to the FG7008GR(AC)’s WAN port using an

Ethernet cable.

You may connect an Ethernet device (e.g. Desktop/PC) on your

FG7008GR(AC)’s Ethernet ports.

NOTE: The POWER, BROADBAND, and INTERNET LEDs should now be

GREEN. If an Ethernet device is connected, its corresponding Ethernet

LED would be in GREEN. The Ethernet LED will also be blinking if there is

activity on the corresponding port.

Содержание FG7008GR(AC)
























































































Результаты поиска

Содержание FG7008GR(AC)

Отзывы:

Aztech FG7008GR(AC), Руководство пользователя, Страница: 16 / 88

Результаты поиска

Содержание FG7008GR(AC)

Отзывы: