User Manual
Custom Port Forwarding
The Custom Port Forwarding page allows you to create up to 15 custom port forwarding
entries to support specific services or applications, such as concurrent NAT/NAPT
operation.
Bridge Filters
The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge
filtering is enabled, each frame is examined against every defined filter rule in sequence.
When a match is found, the appropriate filtering action (allow or deny) is performed. Up
to 20 filter rules are supported with bridge filtering.
Bridge Filters
To configure Bridge Filters:
1. Select Advanced.
2. Select Application > Bridge Filters. This opens the Bridge Filters page.
3. Select Enable Bridge Filters.
4. To add a rule, enter the source MAC address, Destination MAC address, and
Protocol with desired filtering type, then click Add.
Note: You can also edit a rule that you created using the Edit checkbox. You can delete using Delete.
Page 81
of 118
